The Glass Break Detector is a fully-supervised, tamper-protected, ceiling- or wall-mounted unit. It communicates with the 2GIG Control Panel using the 345 MHz frequency. The detector provides a 15 ft (4.6 m) maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection.

Benefits

• Monitors for the sound of breaking glass
• Two test LEDs
• Dual shatter recognition technology

Main Features

• 360° range
• Tamper protected
• Fully supervised
• Lithium battery
• ETL listed
• Wireless Signal Range 300 ft (91.44 m), open air, with Wireless Control Panel
• Code Outputs Alarm; Alarm Restore; Tamper; Tamper Restore; Supervisory; Low Battery
• Transmitter Frequency 345.000 MHz (crystal controlled)
• Unique ID Codes Over one (1) million different code combinations
• Supervisory Interval 70 minutes
• Sensor Type Single microphone, dual stage thud, and crash
• Maximum Horizontal Sensing Angle 360° for ceiling mount or 180° for wall mount
• Dimensions (D x H) 4.55 x 1.9 in (11.56 x 4.83 cm)
• Weight (including battery & bracket) 5.1 oz (144.6 g)
• Housing Material ABS Plastic
• Color White
• Operating Temperature 32°-120° F (0°-49° C)
• Relative Humidity 5-90% Non-Condensing
• Battery (installed) Two (2) CR 123A 3V or equivalent Lithium batteries
• Approved Glass Break Simulator FG-701 Glassbreak Simulator
• Certification Anatel, ETL, FCC, IC, IFETEL, and NOM